Your question: How do you fix a wetsuit cut?

Can You Mend a wetsuit?

Small tears (around 1-2 inches long) can be easily repaired at home. Tears bigger than a few inches may require professional repair services. If the stitches or seams are torn it may also be a good idea to take your suit to a professional for repairs. Before repairing your wetsuit make sure that it is clean and dry.

Can you repair neoprene?

For a rip or tear in your neoprene apply two thin coats of the Gear Aid Aquaseal+NEO Contact Cement to the edges of the tear. Wait 5–10 minutes, then press the edges together. If this is in a high-stress area, you’ll want to reinforce the repair with a patch.

Can a wetsuit be cut?

I have cut my wetsuits down for years and never had any issues. Just use a sharp pair if scissors and cut straight. It’s neoprene so you won’t have fibers fraying like you would a pair of cut off shorts.

Can you sew a patch on a wetsuit?

You’ll only need wetsuit cement, glue-on seam tape, floss, and a needle. Don’t forget that stitching punches tiny holes in the neoprene, which will cause small leaks. You’ll need to sew a blind stitch in your wetsuit to counteract this issue.

IT IS INTERESTING:  What cruise lines sail out of Fort Lauderdale?

How do you use contact cement on a wetsuit?

Use Contact Cement for Incredibly Stretchy Repairs

  1. Locate all rips in your wetsuit, gloves, booties, etc. …
  2. Apply the Aquaseal NEO onto both sides of the tear.
  3. Let the cement dry for five minutes.
  4. Apply a second coat of the adhesive and let dry for 10 minutes.

What’s the best glue for wetsuits?

Top 5 Best Wetsuit Glues Reviewed

  • GEAR AID Aquaseal NEO Contact Cement for Neoprene and Wetsuit Repair.
  • Stormsure Neoprene Queen Wetsuit Repair Glue.
  • Trident Black Neoprene Cement.
  • IST Neoprene Wetsuit Repair Glue.
  • Profile Designs Wet Suit Seal Cement.

How long does a wetsuit last?

On average, a good wetsuit from a quality manufacturer should last anywhere from 4 years to 10 years or more, depending on heavily you use it. A cheaper brand wetsuit that doesn’t have the same construction quality may only last for a season or two before things like zippers become issues.

Can you iron a wetsuit?

Obviously, DO NOT IRON your wetsuit or you will literally melt it but a bit of gentle warming and moving the area can sometimes reduce the creasing. But the best way to get rid of a crease is to never crease neoprene in the first place.

Can you cut sleeves off wetsuit?

By cutting off the sleeves you need to get them not only sealed (so they don’t fray) but fitted correctly, otherwise you will not allow the wetsuit to do its job and trap water to form a thermal layer. Just my advise, but if your wearing it to stay warm, don’t cut the sleeves, spend the money and do it right.

IT IS INTERESTING:  How much does windsurfing cost?

Can you cut the neck of a wetsuit?

I did cut the neck out of my very old Performance brand shortie last year. It worked great – zero complaints – although I was wearing it just for buoyancy and didn’t care too much about cold water. I used it a few times.