Best answer: What does a diver down flag look like in Missouri?

Divers Flag: A rectangular red flag, at least 12 inches x 16 inches, with a two-inch, white diagonal stripe, if on state waters.

What does a drive down flag look like?

This flag is red with a white diagonal stripe running from the top left to the bottom right corners. It is often used to alert other boaters to scuba diving and snorkelling in the ocean.

What does a dive flag look like?

In Australia and internationally, the code flag alpha, which is white and blue, is used to signal that the vessel has a diver down and other vessels should keep well clear at slow speed. … (In North America it is conventionally red with a white stripe from the upper left corner to the lower right corner.)

What are the 2 types of diver down flags?

There are two types of diver down flags used both nationally and internationally: the diver down flag and the alpha flag. The most commonly used of the two is the diver down flag, which is a red flag with a white diagonal stripe.

IT IS INTERESTING:  Can you kayak between the Hawaiian Islands?

What Colour is a diver down flag?

The divers-down symbol is rectangular or square and red in color with a white diagonal stripe. A divers-down flag displayed on a boat must be at least 20 inches by 24 inches and displayed at the highest point where it can be observed from 360 degrees around the vessel. A buoy may not be used or displayed from a vessel.

What do you do when you see a diver down flag?

Vessels should stay as far away from a diver-down flag as is reasonable and prudent for the circumstances. The suggested safe distance is 100 yards.

How close should a diver stay to a dive flag?

Vessels must remain at least 50 feet away from the flag. If they have to approach the diving area, operators must have permission from the person who placed the flag or the boat displaying the flag. Outside of 50 feet, vessel operators must operate at “idle speed” out to a distance of 150 feet.

Which of the following accurately describes the divers Down symbol?

Diver-Down Symbol: The divers-down warning device must contain a divers-down symbol. The symbol is a red rectangle or square with a white diagonal stripe. If the symbol is rectangular, the length may not be less than the height or more than 25% longer than the height.

How big does a dive flag have to be?

Divers Flag: A rigid rectangular flag, at least 14 x 16 inches, with a white diagonal stripe that is one-fifth the width of the flag must be mounted on a float or buoy.

What does a diver down flag look like boat Ed?

Divers Flag: A rectangular red flag, at least 15 x 15 inches, with a white diagonal stripe is used to indicate the presence of a submerged diver in the area.

IT IS INTERESTING:  What is the best length for a kayak?

What does a blue and white flag on a boat mean?

Two types of flags are used to indicate diving activity. … A blue-and-white International Code Flag A (or Alpha flag) must be displayed on boats involved in a diving activity.

What is a scuba diver flag?

A dive flag indicates that scuba divers are nearby. In some areas, flying a dive flag while scuba diving is required by law, but in general it’s a good idea for safety reasons. Dive boats fly a flag to let other vessels know that divers are below. You can fly a flag from a dive float you take with you into the water.

What Colour is a quarantine flag?

noun Nautical. a yellow flag, designating the letter Q in the International Code of Signals: flown by itself to signify that a ship has no disease on board and requests a pratique, or flown with another flag to signify that there is disease on board ship. Also called yellow flag.

What does a boat with a red flag mean?

The red flag with white diagonal stripe, while not international, is commonly used to indicate a diver in the water. Many states now require this flag. It is usually exhibited on a float to mark the diver’s approximate location whereas the “A” flag should be used on the vessel.